Weicon AL-W High Performance Grease, 26450100, 1 Kg

AL-W high performance grease is a special lubricant and corrosion protection which can also be used for underwater applications. WEICON AL-W offers effective protection against aggressive liquids such as sea or wastewater, both in the maritime sector and in wet plants. WEICON AL-W is suitable for rolling and sliding bearings even in mixed friction operation, for joints, levers, sliding guides, spindles, spline shafts, open gears, worm gears, chains and wire cables and at all sliding speeds permitted for grease lubrication.
Technical Data:

Abbreviation (DIN 51502): KPL 1-2 E -25

Consistency assignment (DIN 51818): NLGI-Class 1-2

Base: Spec. calcium soap / mineral oil

Colour: Beige

Density at +20 Deg.C (+68 Deg.F) (DIN 51757): 0.94 g/cu.cm

VKA-TEST (DIN 51350) welding load: 0.7 N

VKA-TEST (DIN 51350) goods load: 3200 N

VKA-TEST (DIN 51350) Spherical cap value (1Min/1000N): 3400mm

Speed identifying value: 350.000

Worked penetration ( DIN ISO 2137): 285 - 315 1/10mm

Water resistance (DIN 51807): 0 - 40

Specific heat transfer capacity (20 Deg.C): 1762 J/(g·K)

Thermal diffusivity (20 Deg.C): 0.296 sq.mm/s

Thermal conductivity (ISO 22007-4) (20 Deg.C): 0.494 W/m·K

Dielectric strength (DIN EN 60243-1) (20 Deg.C): 9.5 kV/mm

Drop Point (IP 396): > 100 Deg.C

Kinematic viscosity (DIN 51562) at +40 deg.C: 100 sq.mm/s

Kinematic viscosity (DIN 51562) at +100 Deg.C: 9 sq.mm/s

Salt spray test with separate protective layers: no corrosion

EMCOR corrosion test (DIN 51 802): 0/0

Conforms to: Federal German Armed Forces TL 9150-0066, NATO specification G-460

Storage Stability: 24 months

Temperature Resistance: -25 to +80 Deg.C

ISSA-Code: 53.052.10/11

IMPA-Code: 450437/38