

Good outdoor lighting does two things at once. It makes your property safer, and it makes it look incredible after dark. Across Dubai, UAE, homeowners and facility managers are upgrading to LED technology for one simple reason — it works better, lasts longer, and costs less to run in the region's d…

A warehouse in the UAE works hard each day, and the power system works even harder. Heat, dust, and long hours place steady pressure on wires, lights, and panels. It is also found that electrical faults cause an alarming amount of industrial fires worldwide. Facts like this show why strong care mat…

Your workspace can affect how you feel every single day. If your chair is too low or your screen too high, your back and neck may start to ache before lunch. The good news? A few small changes can make a big difference. Setting up your desk, chair, and monitor the right way helps you stay…
In the UAE, industries such as oil and gas, petrochemicals, and construction routinely operate in environments where flammable gases, vapours, or combustible dust are present — making ordinary lighting a genuine safety hazard. Adequate, certified illumination is not just a matter of productivity; it is a regulatory and safety requirement under international and UAE-applicable standards. Investing in the right Hazardous Location Lights ensures compliance, protects personnel, and reduces the risk of ignition in high-risk zones.
Hazardous location lighting is specifically engineered to operate safely in environments classified under ATEX, IECEx, or equivalent standards — Zones 1, 2, 21, and 22. These fixtures are constructed with robust, sealed enclosures that prevent internal sparks or heat from igniting surrounding flammable atmospheres. LED technology has transformed this category, with modern hazardous area LED lighting delivering dramatically higher energy efficiency, longer service life, and reduced maintenance burdens compared to older HID or fluorescent alternatives. For facilities operating around the clock in Dubai or across the wider MENA region, this translates directly into lower running costs and fewer shutdowns for bulb replacements.
SupplyVan is a leading supplier of hazardous lighting solutions across the UAE and MENA, stocking a carefully selected range of certified fixtures suitable for petrochemical plants, fuel storage facilities, offshore platforms, food processing plants, and more. Our range covers everything from wall-mount and pendant fittings to hazardous location lighting fixtures for permanent industrial installations and canopy lights for fuel station forecourts and covered loading bays. Whether you need a single replacement unit or a bulk order for a major site build-out, SupplyVan provides competitive B2B pricing, genuine certified products, and fast delivery across the UAE.
The Gewiss GW81085 is a professional-grade ATEX-certified explosion-proof fitting from one of Europe's most respected electrical brands. Designed for continuous use in Zone 1 and Zone 2 hazardous areas, this 72W LED fitting offers high luminous output in a robust, IP66-rated enclosure suitable for the demanding conditions found across UAE industrial sites. Its wide-voltage input, 220–240VAC, makes it compatible with standard UAE mains supply without additional conversion hardware.
The Munira Lighting EX1-120 is a high-power 120W LED canopy explosion-proof light purpose-built for fuel station forecourts, parking canopies, loading bays, and other covered hazardous locations. Emitting a crisp cool white light, it provides excellent visibility in environments where safety and accurate task lighting are equally important. Its wide voltage range, 100–240VAC, makes it highly versatile for installations across the UAE and throughout the broader MENA region.
SupplyVan stocks a wide range of hazardous area lighting dubai customers and MENA buyers rely on, from ATEX-certified explosion-proof fittings to LED canopy lights, covering multiple wattages, mounting types, and protection ratings to match any site specification.
Every product in our range comes from established, internationally recognised manufacturers. You'll find only genuine, certified brands on SupplyVan — no counterfeits, no compromises, backed by our free returns policy for added peace of mind.
Our hazardous location LED light fixtures are sourced to meet ATEX, IECEx, and IP standards. When you purchase from SupplyVan, you can be confident that every fixture has the certifications your site compliance team requires.
SupplyVan operates from the UAE with logistics optimised for fast, reliable delivery to Dubai, Abu Dhabi, Sharjah, and sites across the Emirates. B2B customers benefit from dedicated account management and volume pricing, with secure payment options available online.
Not sure which protection rating or wattage is right for your zone classification? Our knowledgeable team is ready to help you match the correct hazardous location lighting fixtures to your specific site requirements — saving you time and ensuring regulatory compliance from the outset.
Common questions about hazardous location lights, Zone 1 and Zone 2 classifications, ATEX certification, IP ratings, and explosion-proof LED canopy lighting.
QZone 1 refers to locations where flammable gas or vapour is likely to be present during normal operation, while Zone 2 describes areas where it is unlikely to occur under normal conditions but may do so occasionally. Both zones require certified hazardous location lights — however, Zone 1 demands a higher level of protection. Always confirm your site's zone classification with a qualified hazardous area engineer before selecting fixtures.
QATEX is a European certification standard for equipment intended for use in explosive atmospheres. While the UAE follows its own regulatory framework, ATEX and IECEx certified products are widely recognised and accepted by UAE industrial authorities and major oil and gas operators as meeting international best-practice safety standards. Most project specifications in the UAE and MENA region will require either ATEX or IECEx certification for hazardous area equipment.
QNo. IP ratings address protection against dust and water ingress but do not address the risk of a fixture igniting a flammable atmosphere. Only fixtures that have been specifically designed, tested, and certified to ATEX or IECEx standards for hazardous area use are appropriate for Zone 1, Zone 2, or similar classified locations. Using uncertified fixtures in these environments is a serious safety and compliance risk.
QFor outdoor or semi-outdoor installations in the UAE — where fixtures are exposed to dust, sandstorms, heat, and occasional water ingress — a minimum of IP65 is recommended, with IP66 preferred for more exposed locations. IP66-rated hazardous location lighting fixtures are dust-tight and protected against powerful water jets, making them well suited to the harsh environmental conditions common across UAE industrial and construction sites.
QYes. LED canopy explosion-proof lights, such as those in our Munira Lighting range, are specifically designed for fuel station forecourts and covered areas where flammable vapours may accumulate. These fixtures combine the energy efficiency and long service life of LED technology with the explosion-proof construction required for safe operation in these environments. Always verify that the fixture carries the appropriate hazardous area certification for the zone classification of your specific installation.
Selecting the correct certified lighting for a classified hazardous area is a decision that directly impacts worker safety, site compliance, and operational continuity. Our team at SupplyVan is here to help you source the right Hazardous Location Lights — whether you're equipping a fuel station forecourt, an offshore platform, a petrochemical facility, or an industrial warehouse in Dubai or anywhere across the UAE and MENA region.
Shop Hazardous Location Lights →New arrivals, contract deals and restock alerts — straight to your inbox.